The GW2LB has two outlets, one carrying all the horizontally polarized signals and the other the vertical. We would like your consent to use cookies that allow us to give you a personalised experience and advertise to you elsewhere on the internet.

Works perfectly with the SkyQ box and also let’s me continue with the freesat box that I have,as it has both the standard frequency used by freesat and the upgraded frequency for SkyQ.Compatible SkyQ Hybrid LNB is the very latest designed to work with SkyQ, as well as legacy receivers such as Sky, Sky+, Sky+HD, and Freesat. Hybrid LNB’s work with our new 4K Box as well as older Freesat Boxes, letting you record up to four shows at the same time. I tightened the screw on the LNB bracket and then switched over to freesat, changing the ports to two on the row of 4 (quad). The wideband outputs can receive a wide range of satellite frequencies from multiple satellites and down converting them to a lower frequency band for distribution. Finalky I screwed back in the coax cables but into two of the silver ones and NOT the gold ones (for sky Q).

Despite only having two outputs the Wideband LNB will give you full recording features that Sky Q offers. Check the condition and fit of all of the F plugs in the system as these are common points for connection problems to develop 2. Two outputs are used for a Freesat box which is being replaced by SkyQ, and the other two go direct into my TV for Freesat viewing.I have an older human Freesat box on the standard ( silver connectors) and a new 4K Freesat box on the gold connectors.

There used to be an FAQ pinned to the top of this forum which had that as one of its information points, but this has now disappeared. Read this for info on how to receive broadband/ internet without a telephone or landline at your property. GREATER FLEXIBILITY TO A HOUSEHOLD:The Hybrid LNB Allows greater flexibility to a household, avoids having to have more than one satellite dish on the property and when you decided to leave the Sky contract you can use the 4 Quad outputs to power free to air Freesat receivers with no monthly contract charges or having to replace the satellite dish or LNB. The hybrid LNB with multiple outputs is used in installations where multiple satellite receivers are being used. The LNB utilises a combination of low-noise amplifier, local oscillator, frequency mixer, and intermediate frequency amplifier.Got one these to add freesat functionality to other rooms within the house as sky multiroom was too expensive. Copyright: All content, programme titles, trademarks, artwork and associated imagery are trademarks and/or copyright material of their respective owners. But all in all it was a straight swap out and didnt need to get the satellite meter out to adjust it. Depending on how many leads you have to the TV for freesat, most hybrid LNBs will have 2 outputs for "Freesat" so you can run 2 TVs from the LNB with an additional cable however if you have a freesat box and want to record it may need 2 leads.

Superb friendly service received from Andy in assisting with setting up a new Tivusat box for a relative, out of hours as well !I chose the hybrid so I can use sky until it runs out but also to future proof it in case I go back to sky. I'm sorry for jumping into your conversation, but it seems something similar to what is confusing me. You may have a Hybrid LNB which has 4 outputs for freesat so you could run 2 freesat devices that want 2 feeds.