Ultra-bright mini strobe light, suitable for drone flying at night. Used to display the position of the drone to avoid collision with other objects in the air. There are two versions of the StoreSafe Discharger to suit your battery type, XT60 and XT30 - please select as required. The charge current range is from 0.3A to 1.3A, you can choose different charge current for different size batteries, it is better to charge the battery with 2C rate. For other smoke stoppers like the automotive light-bulb or resettable fuse types, they just limit, not stop the current flow. The leakage current may still damage your components. VIFLY ShortSaver is a different smoke stopper that adopts an electronic fuse to completely cut off the current into your RC build if a short circuit or wiring mistake is detected. The VIFLY WhoopStor is a 1S LiPo/LiHV battery charger that can charge up to 6 batteries at once, beingcompatible with both PH2.0 and BT2.0 batteries. It can also storage charge 1S cells. The charger can be powered from DC, USB Type-C (PD3.0, QC2.0,BC1.2) or direct from an 2-5S XT60 battery.

It is series board not parallel board. For example, when you are charging 4pcs 300mAh lipos, set your charger to 0.3A for 1C or 0.6A for 2C. NOT 1.2A or 2.4A. Independent Ports】 6 independent charging channels, not necessary to ensure the batteries are all the same voltage and same size. You also can unplug one that's done and plug in another while the others are still charging.It is far more effective than the old way of using light-bulb or resetting fuse. The shorter the protection time, the safer your build will be as something may break by the time the fuse trips. White LED Strobe (default mode) → White LED Flash → White LED Solid → Red LED Strobe → Red LED Flash → Red LED Solid→ Green LED Strobe → Green LED Flash → Green LED Solid → All LEDs Strobe The VIFLY Strobe is an anti-collision light specially designed for the legal night flying of drones. VIFLY Strobe uses five 3W Hi-intensity LEDs which provide the greatest range available for a mini strobe. 360º 3+ mile visibility satisfies all FAA guidelines, a must-have accessory for your safe flying at night.

Again, I'm not unhappy with my Firehouse strobes, especially the ARC V's which are hard to beat, but 13 grams each. But I think these ViFly strobes can be a great alternative for the smaller Firehouse strobes, especially for a drone you need to keep under 250g. Even the much smaller FHT Dual strobe is very visible for VLOS out to the safe limits of situational awareness. Multiple Power Input】 It supports Type-C, XT60 and DC power input. Type-C used PD and QC protocol that supports fast charge at 9V and 12V, but it not supports regular 5V USB charge. I was also concerned whether the strobe light will affect the camera, but it didn't. I went through all of the images I took this evening, and no issue there too. Fast Charge Speed】 The charge current range is from 0.3A to 1.3A, you can choose different charge current for different size batteries, it is better to charge the battery with 2C rate.

VIFLY Strobe installs 5*3W Hi-intensity LEDs which provide the greatest range available for a mini strobe. 3+ Miles visibility that meets the FAA rules for night flying.

The discharge will work with one battery at a time, however you could use a parallel adapter to connect two batteries to a single discharger. This will increase the total capacity of the battery,so it will take longer to discharge. Meets Federal Regulations: 360º visibility from above for aerial pilots and 3+ mile visibility. Lume Cube drone strobe lights flash at 60 times/second with a 6+ hour run time for safe drone flying. Of course if flying at night, having the red / green / white combo is ok for a pilot if they feel having that help with aircraft orientation.Compact size and light weight makes VIFLY Strobe easily installed on any drones like DJI Mini 3 Pro, Mini 2, Air 2s, Mavic 3, etc. 4. Super Easy Installation Do not charge over 1.5amps. While the fuse is 5A,the rotary dialis rated for 1.5A so don't charge it over 1.5A.

Buzzer Indication】 VIFLY WhoopStor 3 added the buzzer to beep when one charging circle finished, if you don’t like beeping, you can turn the buzzer off manually. VIFLY Strobe uses 5x 3W Hi-intensity LED which provides the greatest range available for a mini strobe. 360º 3+ mile visibility satisfies all FAA guidelines, a must-have accessory for your safe flying at night.FWIW I recently tested the Lucorb T-T3 strobe but returned it as I could see the Firehouse strobes, particularly the ARC V better. VIFLYWhoopStor is the first 1S whoop battery charger with a storage chargemode. It includes both charging and discharging functions. Just select your target voltage, it will do it for you automatically. The charging status, voltage, charger current etc. is displayed clearly on the OLED screen so you can see in realtime the status of the charge. The ultimate Smoke Stopper from VILFY! The ShortSaver 2 is not quite as small as dedicated XT30 or XT60 only versions, but this one will replace both and gives more robust features! Version 2 adds a power on/off switch for easier receiver binding and a new button switch to adjust the short-circuit/over-current trip time. We use 5 bright LEDs, 3 white colors, 1 red colour, and 1 green colour. Each colour has 3 modes, strobe, slow flash, and solid. You can use 3 white LEDs for the FAA 3-mile visibility request and a green/red LED for maintaining Line of sight (LOS). Our strobe can remember your last setting of the mode, no need to set it again for the next time flight. I was quite sure that 6 grams module will not affect the drone's stability in any way, and sure enough it didn't.