Add more water: Add more water sparingly to help JOINT-IT flow into joints of the paving, working diagonally across the joints to ensure JOINT-IT has penetrated all joints of the paving. Final Cleaning: Clean the surface carefully with a fine hair broom so that all JOINT-IT residue is removed. Always sweep diagonally across joint.

All outdoor surfaces require some maintenance when exposed to the changing weather conditions. We recommend cleaning your patio and joints with Joint-It So Clean every 3 to 4 months to keep it looking new. This will depend on how shaded your area is and how many overhanging plants there are. With our spray and go formula, Joint-It So Clean requires minimal effort for the best results.

Are you interested in Joint-IT (20kg) Brush In Resin Jointing Compound?

Ensure the joints, all of the joints are cleaned out to a minimum depth of 20mm and a width of at least 3mm up to 25mm is recommended. When applying Joint-It Simple, take care to use plenty of water and remove all excess product from the top of the slabs at the end of the application. Approximate coverage using 4 size random paving per 20kg tub is 10 -12 sq m, depending on joint width and depth or for more accurate calculation please use the handy joint IT calculator Simply the best – Ready to use paving jointing mortar, ideal for jointing paving slabs, cobbles and natural stone. Rain or shine Joint-It goes in fine. Joint-It Simple can be applied even when it’s raining or wet. Instead of waiting until the rainy months have passed to finish jointing a patio, use our paving grout to get the job done sooner.

How to Apply Joint-It Simple: Weed-Resistant Jointing Sand - YouTube Trusted by Professionals. Loved by Homeowners. The Coverage:A 20kg tub will cover approximately 12-15m2 of paving. You can use a calculator here: https://jointit.com/uk-en/product-calculator/ Joint-It Simple is a ready-mixed paving jointing mortar solution. This jointing mortar is both water-permeable and cement-free. At Pave Direct, It is available in two colours, neutral and grey.Joint-It Simple must be used on a permeable base. This is to allow water to drain through instead of logging on the top of your slabs. We recommend a 6:1 sand and cement base. Failing to comply with this maintenance plan will lead to moss growing in the joints. If you leave it too long to apply an algae remover, the plant will likely have rooted deeply into your driveway gripping the jointing material. If this happens, we recommend power washing your driveway, applying a weed killer, and then reapplying Joint-It Fine approximately 10 days later. Heavy Traffic Pro Jointing Mortar - 2-Part Epoxy Resin Mortar System - suitable for vehicle areas up to 7.5 tonnes

Joint-It Simple can only be used where there is a permeable base. We recommend a 6:1 sand and cement base. If you are unsure if your base is permeable, run a hose for several minutes on the top of the paving. If the water drains through the joints after about 5 minutes, then the base is permeable. If the water logs on the top, then the base is not permeable. Traditional sand and cement methods of pointing are extremely time consuming and laborious. This simple to use, sweep-in jointing grout gets the job finished faster and stands the test of time.

Joint-It Simple

Preparation: Make sure all joints are cleaned out to a minimum depth of 25mm (minimum joint width of 3mm) and clear of any dirt. A cancellation request by the consumer must be put in writing to [email protected] and received by the Company within the 7 working day period.

Add more water: Add more water sparingly to help Joint-It flow into joints of the paving, working diagonally across the joints to ensure Joint-It has penetrated all joints of the paving. Follow-up with either our Supreme Colour Enhancer or Premium Sealer and you can be sure your patio or driveway is protected from the elements, and day-to-day spills, for 3-5 years. (Actual duration of product efficacy depends on local weather conditions). How to use Joint-It Simple, watch the video below for assistance and follow the instructions below and on the outside of each tub:-Preparation:- Make sure all joints are totally clear of any form of dirt, especially oil, grease and remove any loose debris/old jointing mortar or large particles. Approximate coverage using 4 size random paving per 20Kg tub is 12.5 sq m, depending on joint width and depth. Joints must be a minimum of 1/8 th” wide and 1” deep to apply Joint-It Simple. If the joints are smaller than this, we recommend using Joint-It Fine. Joint-It is a brush in Resin Paving Jointing Compound for jointing paving slabs, cobbles & Natural Stone. Work In: Using a squeegee or street broom, spread it evenly. Work in so that it goes deep into the joints and is compacted.