Wire brads (I used 1/2″ brads to nail through 1/4″ plywood and 1″ brads to nail through 1/2″ plywood.)

Make sure width of the bottom of your box is the same as the width of the left/right sides of your box. Step Six: Paint or stain your boxes. I’d like to talk briefly about both options, because there really is a right and a wrong way to paint and stain wood. The living room may not need the same storage solutions as the bedroom or the office. But it still has a way of attracting clutter and mess all the same. Extra sofa cushions, blankets, the kid’s toys, phone chargers, headphones, you name it. If you can carry it, it ends up in the living room, and more often than not on the floor.This process naturally darkens the wood. Left unfinished, it will weather gray like any other wood.

To make 11 boxes I used two full sheets of 1/4″ plywood plus about 1/2 of a sheet of 1/2″ plywood. (The 1/2″ sheet of plywood was leftover from this fold-away dollhouse project.) Priming and Painting the Boxes: When painting your wooden boxes, you should apply a single coat of primer and allow the primer to dry completely. Next, lightly sand down the primer with a high grit sandpaper, such as 320 grit. A standard courier service (DPD, TNT etc.) is usually used to deliver smaller items with a weight limit of 30kg and a maximum length of 1.5m per parcel. A delivery can comprise multiple parcels with no limit on total weight.Storage & organisation Furniture Textiles Kitchenware & tableware Kitchens Lighting Decoration Rugs, mats & flooring Beds & mattresses Baby & children Smart home Bathroom products Laundry & cleaning Plants & plant pots Home electronics Home improvement Outdoor living Food & beverages Christmas Shop Shop by room But if you’re just painting the boxes, then a general smoothing down of the surface is good enough. Tips for using a hole saw: When cutting holes with a hole saw drill bit, I recommend marking the center part of your hole first, then using a smaller drill bit to drill through that point. After allowing one coat of the sealer to dry, lightly sand with a super fine sandpaper or 0000 grade steel wool to smooth out any roughness. Then add one or two additional coats of sealer to finish it off. I chose to make my boxes 1″ more narrow than the shelving opening to give myself and my children wiggle room when returning each box to its space. I also made the height of the boxes 3/4″ shorter than the opening. I’m happy with how this sizing worked out for me. Determine Lumber Needed