Excellent recovery functions. In some cases MPPS can recover ECU’s which others tools can not even make communications with. On certain controllers it even works when with no program is present (a blank memory). Tested with PSA MEV17.4 TC1766 Read/Write via Boot Mode okay, used pinouts from Fgtech galletto documentation. KESS V5.017 has no grey protocols .full protocols such as EDC17/k-line/DSG/DQ200 DQ250 DQ500 Gearbox/ST10…. My MPPS clone arrived yesterday. It works good on Windows 8 and Windows 10 both x64, software will only start when cable gets power from car. Be sure to run as administrator using windows 7.

How to download and install MPPS v18.12.3.8 software

Tested MPPS V18.12.3.8 today on PSA 207 edc16c34 Can read/write ok and ducato edc16c39 read/write ok English, Afrikaans, Albanees, Bahasa Melayu, Cech, Cymraeg, Deutsch, Esti, Espanol, Filipino, Finnish, Francais, Galego, German, Hrvatski, Indonesia, Italiano, Kiswahili, Latviesu, Lietuviskai, Magyar, Malti, Nederlands, Norsk, Polska, Portuguese, Rmoanian, Slovencina, Slovenski, Srpski, Suomea, Svensk, Turkish. HW must be direct linked to the sw. It means V12 sw will work well with v12 hw, V16 sw will work very well with according hw, and so on. I would like to share with everyone that MPPS V13 works on Tablets. I have succesfully read and flashed ecus using my tablet with windows 10 in windows xp compatibility mode. Saves me carrying a laptop with me and I feel safe to use my tablet off the battery while flashing. Something I would never do with a laptop. You need a micro to full size usb adapter for your interface. MPPS software excels in obd2, Multiboot, Tricore for Marelli ECU’s… MPPS v21 vs MPPS V18… The comparison includes software and hardware (PCB), update info, car list, user review… Here you go…

ktm100 can make edc17c64. where to find fake firmware v7.003 to upgrade v6.070, then there is posible to make edc17c64 on eu clones.

MPPS V18 or Kess or KTAG or FgTech 4, which one - EOBDTOOL MPPS V18 or Kess or KTAG or FgTech 4, which one - EOBDTOOL

Of course I did but he neglected to listed like everyone else, so were sending him a new cable like people who had the issue before it was determined. Anyways everyone who had there cable burned we replaced and there using MPPS v18 with no issues. MPPS v21 was NO big update, it was just a timebomb and released solely for the purpose of killing clones KESS V2 is an ECU programming tool that is perfect for OBD use, while KTag is perfect for Jtag, BDM and all the Boot applications (tricorne and ST10). l use kess on my tablet without a problem , like you say battery life is hours , but kess is abit different as it sends file to kess unit and unit sends file to ecu so its very safe , for me win10 runs 99% of stuff l put on it and even stuff win7 will not run kess didnt want to read this tho ? might of been voltage l read at the guys place(fans on with read and write) and wrote at mine with charger but didnt try kess again Excellent recovery functions. In some cases MPPS can recover ECU’s which others tools can not even make communications with. On certain controllers it even works when with no program is present (a blank memory).

Technical Service

have just manage to read via obd with multiboot function a Bosch ME7.9.10 from Fiat Punto T-JET 1.4 turbo … This tool is the only one that can read from obd this ecu ….. As for XP, works Perfect win 7etc, just buy a cheap win 7. or 8 notebook “overspeed” , not worth it, say you did find a way on xp, is it worth risk writing ecu, risk enough we guinea pig clones as it is, lets just not reinvent the wheel, if its meant for win 7, etc, im happy to comply. have to admit quite like XP so had to invest in a cheap laptop for this mpps 18 testing, MPC and EEPROM read OBD-20 seconds, 20 seconds writing (multyboot OBD) .A very strong and stable tool.

MPPS [Sitemap] - Page 14 - Digital Kaos MPPS [Sitemap] - Page 14 - Digital Kaos

MPPS V18 clone a powerful ecu programming tool for a range of controllers including M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic, etc. and MPPS V18 software adds boot mode support for controllers with the tricore processor and adds support for advanced functions on Marelli ECU’s.Here are the supported list and info below, Boot and TC mode are both open and working.NOTE: professional engineers at eobdtool tested mpps v18 clone software without issues on Windows 7 32bit Audi A6 V8 4.2l Petrol (over OBD fuse for dash fuse 11 or 15 , but it worked after pulling the fuse for dash and it went 100%) MPPS covers MAIN + TRICORE + MULTIBOOT and a wide range of controllers incl. M3.8, M5.9, ME7xx, MED9, MED17, EDC15/16/17, Delphi, Siemens, Marelli, Delco, Sagem, Trionic and many others… details can be found in http://mpps-v18.blogspot.com/ Answer 1: Yes, The version that we include (16.1.0.2) runs without the loader and works with Windows XP SP2 and 7 8 10 32/64 bit.Please note that older versions of other versions found online may not be compatible with Windows 7/10