Use special caution when working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, as they are very sensitive to charging characteristics and may explode or burn if mishandled. Make sure the user has enough knowledge of Li-Ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells in charging, discharging, assembly, and storage before use. Always charge in/on a fire-proof surface. Never leave charging batteries unattended. Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Dispose of all battery cells and chargers in accordance with local laws and mandates. Insert your dual coils and tighten the post screws, clip the wire ends as close to the post as you can get, or use the Coily Tool to measure the exact length of the leads needed While the company is headquartered in China, they certainly have a global presence, as they have 10 offices around the world. Their additional bases include Korea, Russia, Indonesia, Spain, France, Germany, Italy, the UK, and the United States. There are currently more than 200 employees at Geekvape, as well as a production force that exceeds 2,000 people globally. While I don’t use squonk mods on a regular basis, I did take the time to test the squonk function on my Dovpo Topside Dual. The squonking action was very smooth and I was able to take advantage of the 6mm deep juice well without over spill from the AF. Airflow and Ring Decide if you want to use the RDA with the bottom feed pin on a squonk mod or as a normal 510 dripper. Unscrew the relevant pin and replace with the one you wish to use.

Some vapers, particularly beginners who have recently quit cigarettes, often tend to take extremely long and forceful hits. This is commonly due to the way in which the individual user to take drags from a cigarette, which tends to be rather vigorous. It can also be the result of the airflow control valve being set too tightly, which causes the user to take more powerful draws. Try taking softer hits with a slightly loosened air intake. This can greatly help reduce or eliminate flooding and gurgling.I really like the metal body which has details pressed into it along with styling lines.The satin finish also makes it less of a fingerprint magnet, but the shiny exoskeleton does show them up quite a bit along with the screen.The control buttons are a big improvement as they are a matching satin metal finish and feel as near perfect a fit as you can get with a decent firm resistance. No More Heroes Anymore

If you're using 18650s in a regulated device, your best bet is the Samsung 30Q, Sony VTC6, or the LG HG2. If those aren't available, the Sony VTC5A, LG HE4, or Samsung 25R are the next best thing. The GeekVape Z50 kit is a versatile option suitable for MTL (Mouth to Lung) and RDTL (Restricted Direct to Lung) vaping. With a 5-50W output range and 2000mAh battery, you can use it all day on a single charge. The kit comes complete with the Z Nano tank that can be used with a range of e-liquid and comes with a 0.3 Ohm coil pre-installed. A spare 0.6 Ohm coil is also supplied. You can also pair the kit with the rest of the Geekvape B series coils. When beginning to vape, remember to draw from the mouthpiece as you hold down the fire button (not before or after pressing the button) Take smooth 1-2 second draws, to begin with until you find the best sensation for you. Also, experiment with the airflow of the tank allowing as much air as comfortable for you to produce a smooth spit free vape.

Mod Issue

Insert cotton through the coils, if using the feather cotton supplied in the kit you will be able to use just one piece of cotton by passing it through both coils Since then, Geekvape has been at the forefront of the industry, releasing MULTIPLE winners across many lines, such as the Aegis, Wenax, Obelisk, and more! Whether it's kits, mods, pod systems, or tanks, Geekvape has you covered with nothing but top-quality. I had been expecting the H45 to be a modern take onthe Boost as it uses the same coils, but it far exceeded it in pretty much every way and certainly got rid of any cons that the Boost had.I mainly use my Boost with the RDTA so I had forgotten just how good the B-Series coils are, and the H45 is the perfect platform for them in my opinion.I will still use the Boost for MTL, but the H45 has rooted its way into my RDL out and about choice.The whole thing feels better quality and the larger battery helps make it last the day. The Geekvape Tengu RDA has a strange airflow, one would assume that the 13 x 1mm holes holes each side would be enough AF to produce a very open draw, not so, the draw is to me is slightly to restrictive.